mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2168 > < Initial Inspection and Diagnostic Overview|Page 2166
Page 138
background image

STEP 10. Check fog light connectors A-21 and A-31 and combination meter connector D-04 for damage.

Q: Are fog light connectors A-21 and A-31 and combination meter connector D-04 in good condition?

YES: Go to Step 11.
NO: Repair or replace them. Refer to Harness Connector Inspection. The fog lights should illuminate normally

STEP 11. Check the harness wires between fog light relay connector A-13X and fog light connectors A-21 and A-31 and combination meter
connector D-04.

Initial Inspection and Diagnostic Overview|Page 2168 > < Initial Inspection and Diagnostic Overview|Page 2166