mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2179 > < Initial Inspection and Diagnostic Overview|Page 2177
Page 149
background image

NO: Go to Step 3.

STEP 3. Check the theft-alarm indicator light.

1. Remove the RV meter. 
2. Disconnect the theft-alarm indicator light connector A-33.

3. Check that the theft-alarm indicator light illuminate when battery positive voltage is applied to terminals 1 and 2.

Q: Is the theft-alarm indicator light in good condition?

YES: Go to Step 4.
NO: Replace it. The theft-alarm indicator light should illuminate, and the theft-alarm system should be armed normally.

STEP 4. Check theft-alarm indicator light connector D-105 and ETACS-ECU connector D-224 for damage.

Q: Are theft-alarm indicator connector D-105 and ETACS-ECU connector D-224 in good condition?

YES: Go to Step 5.
NO: Repair or replace them. Refer to Harness Connector Inspection. The theft-alarm indicator light should illuminate, and the theft-alarm system
should be armed normally.

Initial Inspection and Diagnostic Overview|Page 2179 > < Initial Inspection and Diagnostic Overview|Page 2177