Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 1. Check the driver's seat belt switch.
Q: Is the driver's seat belt switch in good condition?
YES: Go to Step 2.
NO: Replace the driver's inner seat belt. The driver's seat belt switch input signal should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
STEP 2. Check the driver's seat belt switch ground circuit at driver's seat belt switch connector F-18.
1. Disconnect driver's seat belt switch connector F-18 and measure at the harness side.
2. Measure the resistance between terminal 1 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 5.
NO: Go to Step 3.
STEP 3. Check driver's seat belt switch connector F-18 for damage.
Q: Is driver's seat belt switch connector F-18 in good condition?