Montero XLS 4WD V6-3.5L SOHC (2001)
YES: Go to Step 7.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the driver's door lock key cylinder switch should be able to
be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 7. Check the harness wires between driver's door lock key cylinder switch connector H-03 and ETACS-ECU connector D-223.
NOTE: After checking intermediate connector D-25, check the wires. If intermediate connector D-25 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between driver's door lock key cylinder switch connector H-03 and ETACS-ECU connector D-223 in good condition?
YES: Replace the ETACS-ECU. The input signal from the driver's door lock key cylinder switch should be able to be checked and the functions,
which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the driver's door lock key cylinder switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
