Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 13. Check the harness wires between front passenger's door lock key cylinder switch connector H-18 and ETACS-ECU connector D-223.
NOTE: After checking intermediate connector D-15, check the wires. If intermediate connector D-15 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between front passenger's door lock key cylinder switch connector H-18 and ETACS-ECU connector D-223 in good
condition?
YES: Replace the ETACS-ECU. The input signal from the front passenger's door lock key cylinder switch should be able to be checked and the
functions, which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the front passenger's door lock key cylinder switch should be able to be checked and the functions, which are
described in the "Technical Description (comment)," should work normally.
