Montero XLS 4WD V6-3.5L SOHC (2001)
STEP 14. Check the back door lock key cylinder switch.
Q: Is the back door lock key cylinder switch in good condition?
YES: Go to Step 15.
NO: Replace it. The input signal from the back door lock key cylinder switch should be able to be checked and the functions, which are described in
the "Technical Description (comment)," should work normally.
STEP 15. Check the back door lock key cylinder switch ground circuit at driver's door lock key cylinder switch connector I-06.
1. Disconnect back door lock key cylinder switch connector I-06 and measure at the harness side.
2. Measure the resistance between terminal 2 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 18.
NO: Go to Step 16.
STEP 16. Check back door lock key cylinder switch connector I-06 for damage.
Q: Is back door lock key cylinder switch connector I-06 in good condition?
YES: Go to Step 17.
NO: Repair or replace it. Refer to Harness Connector Inspection. The input signal from the rear door lock key cylinder switch should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
