Montero XLS 4WD V6-3.5L SOHC (2001)
Q: Is the resistance less than 2 ohm?
YES: Go to Step 12.
NO: Go to Step 10.
STEP 10. Check front passenger's door lock actuator switch connector H-24 for damage.
Q: Is front passenger's door lock actuator switch connector H-24 in good condition?
YES: Go to Step 11.
NO: Repair or replace it. Refer to Harness Connector Inspection. The input signal from the front passenger's door lock actuator switch should be able
to be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 11. Check the harness wires between front passenger's door lock actuator switch connector H-24 and ground.
NOTE: After checking intermediate connector D-15, check the wires. If intermediate connector D-15 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between front passenger's door lock actuator switch connector H-24 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The input signal from the front passenger's door lock actuator switch should be able to be checked and the functions, which are
described in the "Technical Description (comment)," should work normally.
