mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2253 > < Initial Inspection and Diagnostic Overview|Page 2251
Page 223
background image

STEP 12. Check the front passenger's door lock actuator switch connector H-24 and ETACS-ECU connector D-223 for damage.

Q:

YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the front passenger's door lock actuator switch should be
able to be checked and the functions, which are described in the "Technical Description (comment)," should work normally.

STEP 13. Check the harness wires between front passenger's door lock actuator switch connector H-24 and ETACS-ECU connector D-223.

Initial Inspection and Diagnostic Overview|Page 2253 > < Initial Inspection and Diagnostic Overview|Page 2251