Montero XLS 4WD V6-3.5L SOHC (2001)
NOTE: After checking intermediate connector D-15, check the wires. If intermediate connector D-15 is damaged, repair or replace it Refer to Harness
Connector Inspection.
Q: Are the harness wires between power window sub switch connector H-16 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The door lock switch input signal should be able to be checked and the central door locking system should work normally.
STEP 12. Check the power window sub switch connector H-16 and ETACS-ECU connector D-223 for damage.
Q:
YES: Go to step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The door lock switch input signal should be able to be checked and the central
door locking system should work normally.