Montero XLS 4WD V6-3.5L SOHC (2001)
NOTE: After checking junction block connector D-221 and intermediate connector D-28, check the wires. If junction block connector D-221 and
intermediate connector D-28 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between ETACS-ECU connector D-222 and fusible link (2) in good condition?
YES: There is no action to be taken.
NO: Repair them. The functions, which are described in the "Technical Description (comment)," should work normally.
Column Switch
ETACS-ECU Terminal Arrangement