Montero XLS 4WD V6-3.5L SOHC (2001)
OFF" every four seconds. Note this information. Verify that the new PCM p/n and ROM IDs are the same as those listed in the table below.
10.
Using a ball-point pen, enter the appropriate PCM part number, vendor number, ROM ID #, this TSB number (TSB-07-13-002), your dealer code,
and the current date on the Engine Compartment / Control Module Label (part no. MSSF-024G-00).
11.
Carefully remove all dirt and oil from a vacant area near the VECI label on the underside of the hood, and affix the Engine Compartment label.
12.
Affix the Control Module label to the PCM.
13.
For 3.8L engine models only:
Re-initialize the ETV by turning the ignition switch to the ON position (do not start engine), then turning it off. Keep it off for at least 10 seconds
before starting the engine.
WARRANTY INFORMATION
