mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Air Bag Systems|Page 5293 > < Air Bag Systems
Page 2
background image

1. Replace the following parts with new ones.

-

SRS-ECU

-

Side impact sensors

-

Front seat back assembly (Refer to Front Seat.)

2. Check the wiring harnesses for binding, the connectors for damage, poor connections, and the terminals for deformation.

WHEN AIR BAG DOES NOT DEPLOY IN LOW-SPEED COLLISION.

Check the SRS components. If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones.
Concerning parts removed for inspection, replacement with new parts and cautionary points for working, refer to the appropriate INDIVIDUAL
COMPONENT SERVICE.

Front impact sensors

1. Check the headlight support panel for distortion and rust.
2. Check the front impact sensor for dents, cracks, deformation or rust.
3. Check the sensor harnesses for binding, the connectors for damage, and the terminals for deformation.

SRS-ECU

1. Check the SRS-ECU case and brackets for dents, cracks or deformation.
2. Check the connector for damage, and the terminals for deformation.
3. Check the SRS-ECU and bracket for mounting status.

Air Bag Systems|Page 5293 > < Air Bag Systems