Montero XLS 4WD V6-3.5L SOHC (2001)
5. Fill multi-purpose grease inside the dust cover as shown.
Amount to use: 14 1 g (0.5 0.04 oz)
6. Apply multi-purpose grease to the dust cover lip.
7. Tape the stud threads to avoid damage.
>>C<< WASHER/CASTLE NUT INSTALLATION
Fig. 3 Washer Installation
1. Face the flat side of a washer to a castle nut to install.
2. Tighten castle nut fully, using the special tool MB990767.
CAUTION: Do not apply pressure to wheel bearing by the vehicle weight to avoid possible damage when castle nut is loosened.
3. If the pin holes do not align with one another, tighten the pin to 255 ± 29 Nm (188 ± 21 ft. lbs.) and find the nearest hole then bend the split
pin to fit in.
INSPECTION
INSPECTION OF HUB ROTATION STARTING TORQUE
1. Tighten special tools in hub and knuckle assembly to the specified torque.
Specified torque: 255 ± 29 Nm (188 ± 21 ft. lbs.)
