Montero XLS 4WD V6-3.5L SOHC (2001)
Install the rotor to the pulley assembly so that the rotor's punch mark is at the pump cover side.
>>D<< Cam Ring Installation
Install the cam ring with its identification mark towards the side plate.
>>E<< Vane Installation
Install the vane to the rotor with its round edge outwards (facing towards cam ring).
INSPECTION (DISASSEMBLY AND REASSEMBLY)
^
Check the valve subassembly for clogging.
^
Check the driveshaft assembly for wear or damage.
^
Check the rotor and vane groove for "stepped" wear.
^
Check the contact surface of cam ring and vanes for "stepped" wear.
^
Check the vanes for damage.
