Montero XLS 4WD V6-3.5L SOHC (2001)
Removal Service Points
<<A>> Cover Removal
Insert the special tool MB990784 from the indicated position to remove the cover.
NOTE: The special tool can be inserted through the notch behind the position shown.
<<B>> Steering Wheel And Air Bag Module Assembly Removal
1. Disconnect the air bag module connectors and the horn switch through a hole made after the removal of the cover.
2. Loosen the bolt completely. Then remove the steering wheel and air bag module assembly.
NOTE: Use a hexagonal bit socket or a hexagonal wrench having an effective length of 75 mm (0.29 inch) or more in the hexagonal section
and the diameter of 8 mm (0.031 inch) or more.