Montero XLS 4WD V6-3.5L SOHC (2001)
DISASSEMBLY AND REASSEMBLY
Disassembly Service Point
<<A>> Self-Locking Nut Removal
1. Use the special tool to press the coil spring.
CAUTION: Do not tighten the special tool bolt too tight. The tool will be broken if the bolt is tightened over the allowable torque 74 Nm (55
ft. lbs.). Install the special tools evenly, and so that the maximum length will be attained within the installation range. Do not use an impact
wrench, as it will cause the bolt of the special tool to be seized.
2. To prevent the piston rod from turning and unscrew the self-locking nut.
