Montero XLS 4WD V6-3.5L SOHC (2001)
1. Place a piece of wood at the lower arm as shown in the illustration. Using the floor jack, compress the coil spring to remove the lower arm
mounting bolt.
2. Lower the floor jack slowly, and then remove the coil spring.
<<B>> Bolt Assembly (Camber Adjusting Bolt) Removal
Make the mating marks to the bracket and the camber adjusting bolt, and then remove the camber adjusting bolt.
Installation Service Points
>>A<< Coil Spring/Lower Arm Mounting Bolt Installation
1. The identification color of the coil spring should be located at the lower side.
2. Align the coil spring end with the spring lower pad cavity.
3. Place a piece of wood at the lower arm as shown in the illustration. Using the floor jack, compress the coil spring to remove the lower arm
mounting bolt.
LOWER ARM BUSHING REPLACEMENT
Use the special tool to drive out and press-fit the lower arm bushing.
