Montero XLS 4WD V6-3.5L SOHC (2001)
Wheels: Technical Service Bulletins
Wheels - Balancing Procedure
No: TSB-01-31-002
DATE: April, 2001
MODEL: 2001 Montero
SUBJECT:
WHEEL BALANCING
This bulletin supercedes TSB-00-31-003, issued September, 2000, to include additional balancing instructions.
PURPOSE
Due to the design of the 2001 Montero wheels properly installing the tire/wheel balancing equipment cones is extremely critical. The wheel may appear
to be mounted properly, but may not be seated correctly on the balancer cone. Improper cone installation can cause improper balance, resulting in
customer complaint of vibration.
NOTE:
Consult your tire/wheel balancing equipment representative regarding optional size cones that best fit Montero wheels.
AFFECTED VEHICLES
2001 Montero
PROCEDURE
1.
Identify the wheel type. On vehicles built since mid-August 2000, the hub area of the wheel was redesigned for improved cone positioning. The
redesigned hub is identified by the letter "A" cast into one of the spokes as shown: