Montero XLS 4WD V6-3.5L SOHC (2001)
Transmission Control System Relay: Testing and Inspection
A/T CONTROL RELAY CHECK
1. Remove the A/T control relay.
2. Use jumper wires to connect the A/T control relay terminal 2 to the negative battery terminal and terminal 4 to the positive battery terminal.
3. Check the continuity between terminal 1 and terminal 3 of the A/T control relay when the jumper wires are connected to and disconnected from
the battery.
4. If there is any problem with the A/T control relay, replace it.
