Outlander 2WD V6-3.0L (6B31) (2007)
/Page-1496011.png)
4. Turn the ignition switch to the "LOCK" (OFF) position.
OK: Normal condition is displayed.
Q: Is the check result normal?
YES (Normal conditions are displayed for all the items.): Go to step 6.
NO (Normal condition is not displayed for item No. 254.): Refer to Inspection Procedure 2: ETACS-ECU does not receive any signal from the
ignition switch (IG1).
NO (Normal condition is not displayed for item No. 256.): Refer to Inspection Procedure 5: ETACS-ECU does not receive any signal from the
front door switch (LH).
NO (Normal condition is not displayed for item No. 257.): Refer to Inspection Procedure 6: ETACS-ECU does not receive any signal from the
front door switch (RH).
NO (Normal condition is not displayed for item No. 258.): Refer to Inspection Procedure 8: ETACS-ECU does not receive any signal from the
rear door switch (RH).
NO (Normal condition is not displayed for item No. 259.): Refer to Inspection Procedure 7: ETACS-ECU does not receive any signal from the
rear door switch (LH).
NO (Normal condition is not displayed for item No. 260.): Refer to Inspection Procedure 9: ETACS-ECU does not receive any signal from the
liftgate switch.
NO (Normal condition is not displayed for item No. 264.): Refer to Inspection Procedure 3: ETACS-ECU does not receive any signal from the
key reminder switch.
STEP 6. Using scan tool MB991958, check pulse check.
Check the signals related to the keyless entry system operation.
