Outlander 2WD V6-3.0L (6B31) (2007)
-
Malfunction of the horn.
-
Malfunction of ETACS-ECU.
-
Damaged wiring harness and connectors.
DIAGNOSTIC PROCEDURE
STEP 1. Verify the hazard warning lights.
Check that the hazard warning lights illuminate normally.
Q: Is the check result normal?
YES : Go to Step 2.
NO : Refer to Inspection Procedure 1: The Hazard Warning lights do not illuminate.
STEP 2. Verify the dome light.
Check that the dome light illuminate normally.
Q: Is the check result normal?
YES : Go to Step 3.
NO : Refer to Trouble Symptom Chart.
STEP 3. Verify the horn.
Check that the horn normally.
Q: Is the check result normal?
YES : Go to Step 4.
NO : Replace the horn.
STEP 4. Check the operation of the keyless entry system.
Operate the transmitter and check that all doors (including the liftgate) lock and unlock.
Q: Is the check result normal?
YES : Go to Step 5.
NO : Refer to See: Symptom Related Diagnostic Procedures/Trouble Symptom Chart
STEP 5. Check the customize function.
Check that anyone of the followings other than "Lock: 0, Unlock: 0" is set for "Hazard answer back" with a customization function.
-
Lock: 1, Unlock: 2
-
Lock: 1, Unlock: O
-
Lock: O, Unlock: 2
-
Lock: 2, Unlock: 1
-
Lock: 2, Unlock: O
-
Lock: O, Unlock: 1
Q: Is the check result normal?
YES : Go to Step 6.
NO : Set "Hazard answer back" to anyone other than "Lock: 0, Unlock: 0" with a customization function.
STEP 6. Check the customize function.
Check that anyone of the followings other than "Not sound horn" is set for "Horn chirp by RKE" with a customization function.
-
Lock any time