Outlander 2WD V6-3.0L (6B31) (2007)
^
Do not drop or shock the hydraulic unit.
^
Do not turn the hydraulic unit upside down or lay down the unit because the inner air becomes difficult to be bled.
INSTALLATION SERVICE POINTS
>>A<< BRAKE TUBE CONNECTION
Install the brake pipe to the hydraulic unit as shown in the figure.
1. To rear brake (RH) <Marking color: White>
2. From master cylinder (secondary) <Marking color: Yellow>
3. To front brake (LH) <Marking color: Red and white>
4. To front brake (RH) <Marking color: Orange and white>
5. From master cylinder (primary) <Marking color: Blue>
6. To rear brake (LH) <Marking color: Pink>