Outlander 2WD V6-3.0L (6B31) (2007)
/Page-448002.png)
Use special tools MB990767 and MD998719 to remove the camshaft sprocket.
<<B>> CAMSHAFT OIL SEAL REMOVAL
1. Make a notch in the oil seal lip section with a knife, etc.
CAUTION: Be careful not to damage the camshaft and the cylinder head.
2. Cover the end of a flat-tipped screwdriver with a shop towel and insert into the notched section of the oil seal, and pry out the oil seal to remove it.
INSTALLATION SERVICE POINTS
>>A<< CAMSHAFT OIL SEAL INSTALLATION
