Outlander 2WD V6-3.0L (6B31) (2007)
/Page-1703005.png)
STEP 8. Check front dome light connector D-02 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front dome light connector D-02 in good condition?
YES: Go to Step 9.
NO: Repair the damaged parts.
STEP 9. Check the wiring harness between D-02 front dome light connector (terminal No. 1) and body ground.
Q: Is wiring harness between front dome light connector D-02 (terminal No. 1) and body ground in good condition?
YES: Replace the front dome light, and then go to Step 10.
NO: Repair the wiring harness.
STEP 10. Retest the system
Check that the front dome light illuminates/extinguishes normally.
Q: Do the front dome light work normal?
YES: The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the ETACS-ECU.
Inspection Procedure 2
Inspection Procedure 2: The rear dome light does not illuminate normally.
