Outlander 2WD V6-3.0L (6B31) (2007)
Connect scan tool MB991958. Refer to "How to connect scan tool (M.U.T.-III)."
-
Turn the ignition switch to the "ACC" position.
-
Turn "ON" the hazard light switch.
Q: Does scan tool MB991958 display the items "Hazard switch" as normal condition?
YES<Normal condition is displayed for item.>: Go to Step 3.
NO<Normal condition is not displayed for item No. 265.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 11 "ETACS-ECU does not receive any signal from the hazard warning light switch".
STEP 3. Retest the system Check that the hazard warning light illuminate normally.
Q: Does the taillight work normally?
YES: The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the ETACS-ECU.