Outlander 2WD V6-3.0L (6B31) (2007)
/Page-677088.png)
2. Measure the resistance between joint connector (CAN1) terminal 9 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 22 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES(vehicles without MMCS): Go to Step 9.
YES(vehicles with MMCS): Go to Step 10.
NO: Go to Step 30.
STEP 9. Check the wiring harness between joint connector (CAN1) C-103 and radio and CD player or CD changer connector C-16 for a short
to ground. Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 10 and body ground.
OK: 1 kilo ohm or more
