Outlander 2WD V6-3.0L (6B31) (2007)
3. Measure the resistance between joint connector (CAN1) terminal 14 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles with KOS): Go to Step 3.
YES (vehicles with WCM): Go to Step 4.
NO (vehicles with KOS or WCM): Go to Step 48.
STEP 3. Check the wiring harness between joint connector (CAN1) C-103 and KOS-ECU connector C-102 for a short to ground. Measure the
resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 8 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 21 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES: Go to Step 5.