Outlander 2WD V6-3.0L (6B31) (2007)
Engine Control Module: Testing and Inspection
ECM Terminal Voltage Check Chart
CHECK AT THE ENGINE CONTROL MODULE (ECM)
1. Disconnect the ECM connectors B-10 and B-11, and connect check harness special tool MB992110 between the ECM connectors.
2. Measure the voltage between each check harness connector terminal and check harness connector ground terminal (No. 25 or No. 29). switch is in
"OFF" position but is no problem for checks.
Check Harness Special Tool MB992110 Connector Terminal Arrangement Part 1