Outlander 2WD V6-3.0L (6B31) (2007)
6. Connect a digital voltage meter between terminal No. 3 and terminal No. 4.
7. Measure the output voltage of the heated oxygen sensor under the following driving.
Transaxle: 2 nd
Drive with wide open throttle
Engine: 3,500 r/min or more
8. If the output voltage is not within the standard value, replace the heated oxygen sensor.
NOTE:
-
If the sufficiently high temperature (of approximate 400 °C or more) is not reached although the oxygen sensor is normal, the output voltage
would be possibly low although the rich air-fuel ratio.
-
For removal and installation of the heated oxygen sensor, refer to Exhaust Pipe and Main Muffler.