Outlander 2WD V6-3.0L (6B31) (2007)
STEP 6. Check of ignition key cylinder illumination light bulb.
Q: Is the ignition key cylinder illumination light bulb in good condition?
YES: Go to Step 7.
NO: Replace the bulb of the ignition key cylinder illumination light.
STEP 7. Retest the system.
Q: Does the ignition key cylinder illumination light illuminate/extinguish in good condition?
YES: The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the ETACS-ECU.