Outlander 2WD V6-3.0L (6B31) (2007)
5.
The check mark at the bottom of the page WILL NOT be 'active' (bright). Scroll to F.A.S.T./IMMO/Keyless/ TPMS and select that line. Go to
Step 6.
OUTLANDER
The check mark at the bottom of the page should be
'active' (bright). Click the check mark at the bottom of the page and go to Step 7.
6.
When this screen appears, select option code VF3.
Click the check mark at the bottom of the page.
7.
When the dialog box "Start The All DTC's Are You Sure" appears, click on the check mark.
All Stored DTCs will be erased, however active DTCs will not. Once erasing is completed, ensure that no DTCs remain. Diagnose and repair any active
DTCs that remain before the vehicle is returned to the
customer.
WARRANTY INFORMATION
This Technical Service Bulletin is for information only. No special warranty procedures apply.