Outlander 2WD V6-3.0L (6B31) (2007)
-
Open the driver's door.
Q: Does scan tool MB991958 display the items "Dr door unlock", "Dr door ajar switch", and "Handle lock switch" as normal condition?
YES<Normal conditions are displayed for all the items.>: Go to Step 3.
NO<Normal condition is not displayed for item No. 228.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 4 "ETACS-ECU does not receive any signal from the front door lock actuator".
NO<Normal condition is not displayed for item No. 254.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 2 "ETACS-ECU does not receive any signal from the ignition switch (IG1)".
NO<Normal condition is not displayed for item No. 256.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 6 "ETACS-ECU does not receive any signal from the front the front door switch (RH)".
NO<Normal condition is not displayed for item No. 264.>: Troubleshoot the ETACS-ECU. Refer to Body Control Systems, Diagnosis -
Inspection Procedure 3 "ETACS-ECU does not receive any signal from key reminder switch".
STEP 3. Check key reminder switch connector C-211, ETACS-ECU connector C-315 for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is key reminder switch connector C-211, ETACS-ECU connector C-315 in good condition?
YES: Go to Step 4.
NO: Repair the damaged parts.
STEP 4. Check the Wiring harness between key reminder switch connector C-211 (terminal No. 3,5) and ETACS-ECU connector C-315
(terminal No. 13,18).
Check the input/output line for open circuit.
Q: Is the check result normal?
YES: Go to Step 5.
NO: Repair the wiring harness between key reminder switch connector C-211 and ETACS-ECU connector C-315.
STEP 5. Check of ignition key cylinder illumination light bulb.
Q: Is the ignition key cylinder illumination light bulb in good condition?
YES: Go to Step 6.
NO: Replace the bulb of the ignition key cylinder illumination light.
STEP 6. Retest the system.
Q: Does the ignition key cylinder illumination light illuminate/extinguish in good condition?
YES: The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - How to Cope with
Intermittent Malfunction).
NO: Replace the ETACS-ECU.
Ignition Key Cylinder Illumination Light does not Illuminate/Extinguish Normally. [Vehicles With