Outlander 2WD V6-3.0L (6B31) (2007)
/Page-1290004.png)
4. Put the second side of the tire in position, so that the cross point of the belt with the rim is approximately 20 cm (7.9 inch) away from the valve.
the curved arrow shows the direction of rotation of the wheel.
5. Turn the wheel in order to engage all of the second side of the tire.
NOTE: The standard shoes can pass over the sensor without damaging it.
]]C[[ TIRE PRESSURE INFLATION/VALVE NUT RETIGHTENING
CAUTION: After tire inflation, retighten the valve nut 8.0 N.m (71 inch pounds). This is necessary, because the TPMS transmitter is secured
to the wheel with the valve nut and rubber grommet. The rubber grommet will be depressed by tire pressure or deteriorate over a period of
time, which requires the valve nut to be retightened.
Inflate tire to required pressure, then retorque the valve nut to 8.0 N.m (71 inch pounds).
