Outlander 4WD L4-2.4L (4B12) (2008)
Insert a flat-tipped (-) screwdriver as shown in the figure to remove the inside handle cover cap.
[[B]] DOOR TRIM CAP REMOVAL
Insert a flat-tipped (-) screwdriver as shown in the figure to remove the door trim cap.
[[C]] FRONT/REAR DOOR TRIM REMOVAL
Using a flat-tipped (-) screwdriver as shown in the figure, remove the inside lock cable and the inside handle cable, then remove the door trim.
INSTALLATION SERVICE POINTS
]]A[[ POWER WINDOW SWITCH INSTALLATION
After the power window switch is installed or replaced, perform learning of the power window fully-closed position (Refer to Body - Door Glass and
Regulator).
]]B[[ FRONT DOOR SASH TRIM INSTALLATION