Outlander 4WD L4-2.4L (4B12) (2008)
Steering Angle Sensor: Removal and Replacement
STEERING WHEEL SENSOR
REMOVAL AND INSTALLATION
CAUTION:
^
Always align the center of the clock spring before installing the steering wheel sensor. Otherwise, the sensor can be damaged.
^
If the center of the clock spring is not correctly aligned, the steering wheel may not be turned fully or the cable inside the clock spring
may be broken, causing the SRS air bag to be inoperative or operated incorrectly.
^
Before removing the steering wheel/air bag module assembly, refer to Service Precautions and Air Bag Module Clock Spring.
^
When the steering wheel sensor is replaced, always carry out calibration to make ASC-ECU learn the neutral point.
Pre-removal & Post-installation Operation
Removal Steps 1-2
INSTALLATION SERVICE POINTS
]]A[[ NEUTRAL POSITIONING OF STEERING WHEEL SENSOR
CAUTION:
^
Always align the center of the clock spring before installing the steering wheel sensor. Otherwise, the sensor can be damaged.
^
If the center of the clock spring is not correctly aligned, the steering wheel may not be turned fully or the cable inside the clock spring
may be broken, causing the SRS air bag to be inoperative or operated incorrectly.