Outlander 4WD L4-2.4L (4B12) (2008)
Wheel Speed Sensor: Testing and Inspection
WHEEL SPEED SENSOR
INSPECTION
WHEEL SPEED SENSOR CURRENT CHECK
CAUTION: Do not connect the battery terminals in reverse as the wheel speed sensor may be damaged.
1. Connect the circuit tester to the wheel speed sensor using the special tool extra fine probe (MB992006), and measure the sensor current as a single
unit.
Standard value: 5.9 to 8.4 mA or 11.8 to 16.8 mA
2. If the measurement value is not within the standard value range, replace the wheel speed sensor with a new one.
WHEEL SPEED SENSOR INSULATION CHECK