Outlander 4WD L4-2.4L (4B12) (2008)
Install the thermostat so that the jiggle valve is facing straight up. Be careful not to fold or scratch the rubber ring.
]]B[[ RADIATOR LOWER HOSE INSTALLATION
1. Insert each hose as far as the projection of the water inlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
INSPECTION
Thermostat Check
1. Immerse the thermostat in water, and heat the water while stirring. Check the thermostat valve opening temperature.
Standard value:
Valve opening temperature: 82 ± 1.5° C (180 ± 3° F)