Outlander 4WD L4-2.4L (4B12) (2008)
2. Apply sealant to the joint between the cylinder head and timing chain case assembly as shown in the figure and install the rocker cover assembly to
the cylinder head.
Specified sealant: Three bond 1217G or equivalent
NOTE: Install the rocker cover assembly within 3 minutes after the application of sealant.
3. Tighten the rocker cover assembly mounting bolts to the specified torque in the order of number shown in the figure.
Tightening torque: 3.0 ± 1.0 Nm (27 ± 8 in-lb)
4. Tighten again the rocker cover assembly mounting bolts to the specified torque in the order of number shown in the figure.
Tightening torque: 5.5 ± 0.5 Nm (49 ± 4 in-lb)