Outlander 4WD L4-2.4L (4B12) (2008)
Engine Mount: Service and Repair
ENGINE MOUNTING
REMOVAL AND INSTALLATION [2.4L ENGINE]
Pre-removal & Post-installation Operation
Removal Steps 1-4
Removal steps
1. Power steering pressure hose clamp
2. Engine mounting bracket
3. Engine mounting insulator stopper
4. Engine mounting insulator
REMOVAL SERVICE POINT
[[A]] ENGINE MOUNTING BRACKET REMOVAL
CAUTION: When supporting the engine and transmission assembly with a garage jack, be careful not to deform the engine oil pan.
1. Place a garage jack against the engine oil pan with a piece of wood in between to support the engine and transmission assembly.
2. Operate a garage jack so that the engine weight is not applied to the engine mounting insulator, and remove the engine mounting insulator.
INSTALLATION SERVICE POINT