Outlander 4WD L4-2.4L (4B12) (2008)
REMOVAL SERVICE POINT
>>A<< AIR MIXING DAMPER CONTROL MOTOR, OUTSIDE/INSIDE AIR SELECTION DAMPER MOTOR, MODE SELECTION
DAMPER CONTROL MOTOR REMOVAL
NOTE: A normal plate-type ratchet driver is recommended.
INSTALLATION SERVICE POINT
>>A<< OUTSIDE/INSIDE AIR SELECTION DAMPER MOTOR INSTALLATION
Adjust the position of the outside/inside air selection damper while supporting it from the lower side through the hole which the clean air filter and the
blower motor were removed.