Outlander 4WD L4-2.4L (4B12) (2008)
Fog/Driving Lamp Bulb: Service and Repair
BULB REPLACEMENT
1. Remove the bolt under the fog light bracket and tilt the fog light to ease the bulb pulling-out.
CAUTION: Don't touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol
or thinner immediately and dry well, and then install it.
2. Disconnect the connector and withdraw the bulb.
3. Replace the bulb, and connect securely the connector.