Outlander 4WD L4-2.4L (4B12) (2008)
Front Door Switch (RH) Input Circuit
TECHNICAL DESCRIPTION (COMMENT)
If there is an error to the front door switch (RH) input signal, the front door switch (RH) signal is no longer output to the communication line.
TROUBLESHOOTING HINTS
-
The front door switch (RH) may be defective
-
The ETACS-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB992006: Extra Fine Probe
STEP 1. Check front door switch (RH) connector D-35 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front door switch (RH) connector D-35 in good condition?
YES : Go to Step 2.