Outlander 4WD L4-2.4L (4B12) (2008)
Liftgate Switch Input Circuit
TECHNICAL DESCRIPTION (COMMENT)
If there is an error to the liftgate switch input signal, the liftgate switch signal is no longer output to the communication line.
TROUBLESHOOTING HINTS
-
The liftgate switch may be defective
-
The ETACS-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB992006: Extra Fine Probe
STEP 1. Check liftgate switch connector F-12 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is liftgate switch connector F-12 in good condition?
YES : Go to Step 2.