Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633082.png)
3. Measure the voltage between ETACS-ECU connector terminal 6 and body ground.
OK: 4.7 volts or less
4. Measure the voltage between ETACS-ECU connector terminal 7 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES : Go to Step 2.
NO: Go to Step 13.
STEP 2. Check the wiring harness between joint connector (CAN1) C-103 and combination meter connector C-03 for a short to ground.
Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 3 and body ground.
OK: 1 kilo ohm or more
