Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633085.png)
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 12 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 6.
NO : Go to Step 27.
STEP 6. Check the wiring harness between joint connector (CAN1) C-103 and occupant classification-ECU connector D-31-2 for a short to
ground. Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 11 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 24 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without hands-free cellular phone system) : Go to Step 8.
