Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633122.png)
3. Measure the resistance between joint connector (CAN1) terminal 23 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without satellite radio) : Go to Step 12.
YES (vehicles with satellite radio) : Go to Step 11.
NO : Go to Step 55.
STEP 10. Check the wiring harness between joint connector (CAN 1) C-103 and CAN box unit connector C-13 for a short to ground. Measure
the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 10 and body ground.
OK: 1 kilo ohm or more
3. Measure the resistance between joint connector (CAN1) terminal 23 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without satellite radio) : Go to Step 12.
