Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633131.png)
4. Measure the voltage between joint connector (CAN1) terminal 23 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES (vehicles without satellite radio) : Go to Step 24.
YES (vehicles with satellite radio) : Go to Step 23.
NO : Go to Step 55.
STEP 22. Check the wiring harness between joint connector (CAN 1) C-103 and CAN box unit connector C-13 for a short to power supply.
Measure the voltage at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN1), and measure the voltage at the wiring harness side of joint connector (CAN1).
2. Turn the ignition switch to the ON position.
3. Measure the voltage between joint connector (CAN1) terminal 10 and body ground.
OK: 4.7 volts or less
4. Measure the voltage between joint connector (CAN1) terminal 23 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES (vehicles without satellite radio) : Go to Step 24.
