Outlander 4WD L4-2.4L (4B12) (2008)
/Page-633136.png)
2. Check that there is continuity between joint connector (CAN1) terminals 11 and 24.
OK: No continuity
Q: Is the check result normal?
YES (vehicles without hands-free cellular phone system) : Go to Step 32.
YES (vehicles with hands-free cellular phone system) : Go to Step 31.
NO : Go to Step 52.
STEP 31. Check the wiring harness between joint connector (CAN 1) C-103 and hands free module connector C-121 for line-to-line short.
Measure the resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN 1), and check that there is continuity at the harness side of joint connector (CAN1).
2. Check that there is continuity between joint connector (CAN1) terminals 7 and 20.
OK: No continuity
Q: Is the check result normal?
YES : Go to Step 32.
NO : Go to Step 53.
STEP 32. Check the wiring harness between joint connector (CAN1) C-103 and A/C-ECU connector C-109 for line-to-line short. Measure the
resistance at joint connector (CAN1) C-103.
1. Disconnect joint connector (CAN 1), and check that there is continuity at the harness side of joint connector (CAN1).
