Outlander 4WD L4-2.4L (4B12) (2008)
Throttle Body: Removal and Replacement
THROTTLE BODY ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION:
-
When the throttle body assembly replacement is performed, use scan tool MB991958 to initialize the learning value (Refer to general
(body and chassis), Precautions Before Service - Initialization Procedure for Learning Value in MFI Engine).
-
Never loosen the screw fixing the throttle body assembly resin cover. If the screw is loosened, the sensor incorporated in the resin cover is
misaligned and the throttle body assembly does not work normally.
Pre-Removal And Post-Installation Operation
Removal Steps 1-9
INSTALLATION SERVICE POINTS
>>A<< THROTTLE BODY GASKET INSTALLATION