Outlander 4WD L4-2.4L (4B12) (2008)
/Page-838007.png)
Click on the check mark at the bottom of the page.
j.
A message will advise you that the system will "Automatic Search the data".
Click on the check mark to continue.
NOTE:
If a "Complete Reprogramming" message does not appear, continue with step k. If a "Complete Reprogramming" message is displayed, the
ECM is already reprogrammed for this concern. If this message displays, do not continue with this reprogramming procedure. Click the check
mark to clear the window, then click on the Home icon at the lower left corner of the screen to return to the System Select main page. If the
TCM was not shown to be at the latest programming level during the initial steps of this TSB, perform TSB-07-23-006 and continue with
reprogramming the TCM.
k.
The CAN database screen will display.
(If more than one row is displayed in the table, select the appropriate ECM part number.)
Click on the check mark to continue.
L.
Click on the check mark to begin reprogramming.
NOTE:
It will take up to 5 minutes to complete the reprogramming.
CAUTION:
